- LJ’s modular alignment rolls are used in pipe, tank and vessel double-jointing systems for maximum efficiency & safety, with up to 65% decrease in fit up cycle times.
 |
Time Saving: Fast & precise alignment of pipe or vessel |
 |
Decrease Fit-Up Time: Fine leveling and side shift for fast fit up |
 |
Any Working Environment: Compensating for inconsistencies in shop floor or ground |
 |
Higher ROI: reduce reliance on expert welders, reduce skilled operators costs and enjoy high ROI on your welding investments |
Side-By-Side Modular Alignment Roll Systems Comparison
| Specifications |
10-Ton Capacity Modular Pipe Alignment Roll Fit-Up System (10TMR-100)
|
10-Ton Capacity Modular Tank and Vessel Alignment Roll Fit-Up System (10TMR-GL-100)
|
20-Ton Capacity Modular Pipe Alignment Fit-Up Roll System (20TSR-100/200)
|
12-Ton Capacity Modular Pipe Alignment Fit-Up Roll System (12TS-100/200)
|
| Load Capacity (Driver & Idler Set): |
Driver: 10,000 lbs Idler: 10,000 lbs |
Driver: 10,000 lbs Idler: 10,000 lbs |
Driver: 20,000 lbs Idler: 20,000 lbs |
Driver: 12,000 lbs Idler: 12,000 lbs |
| Diameter Range: | 6" - 96" | 6" - 96" | 6" - 60" | 6" - 48" |
|
Tractive Effort: Output Torque: |
Dual Drive, 3,400 lbs 17,000 in-lbs |
Dual Drive, 2,400 lbs 12,000 in-lbs |
Single Drive 5,700 lbs 40,000 in-lbs |
Single Drive 3,500 lbs 25,000 in-lbs |
| Power Requirements: | 480 V, 3-ph | 480 V, 3-ph | 480 V, 3-ph | 110 V, 1-ph |
| Rotation Speed: | 5 - 50 in/min | 10 - 50 in/min | 0 - 80 in/min | 5 - 50 in/min |
| Make A Fully Automated Welding Cell With |
4' x 5' Portable Column & Boom Welder |
4' x 5' Portable Column & Boom Manipulator 6' x 6' Column & Boom Manipulator 9' x 9' Column & Boom Manipulator |
.png?width=100&height=100&name=10TMR-GL-(1).png)
