PIPE STANDS: JACK STANDS & TRIPODS

LJ's HDJ-style Roller Support Jack Stands and Pipe Tripods provide the widest range of features available, including geared height adjustability, braking base casters, ratchet hold-down straps, forklift pockets, and extra heavy-duty frame design.

	Minimal Footprint: Our Roller Support Jack Stands and Pipe Tripods perform highly precise rotations for pipe fabrication and only require minimal floor space to operate properly
	Portability: LJ’s Roller Support Jack Stands and Pipe Tripods provide roller wheels that allow operators to carry a pipe around the shop or even outside, saving a lot of time when relocating pipes
	Less Additional Equipment: Our Gear Height/Roller Base Stands and Pipe Tripods help to protect pipes from scarring, minimizing drag forces and reducing demand for additional equipment on the job sites
	Height Adjustability: This equipment provides the height adjustability that allows operators to raise or decline pipes to the same height of the working position which saves a lot of time and work. By bringing the pipe in parallel to the work position it is much easier to adjust hi/low, achieve a square face-off and avoid any misalignments

LJ'S JACK STANDS & TRIPODS SELECTION

2 TON GEARED HEIGHT/ROLLER BASE STAND: HDJ2C-100

HDJ2C-100-thumb-300

5 TON GEARED HEIGHT/ROLLER BASE STAND: HDJ5C-100

HDJ5C-100-thumb-300

2,500 LB ROLLER TRIPOD STAND: LD255-100

LD255-100-thumb-300

5,000 LB TRIPOD STAND - V-HEAD: TS3-160/100

TS3-thumb-300-1

5,000 LB TRIPOD STAND - V-HEAD: TS3-280V

TS3-thumb-300-1

5,000 LB TRIPOD STAND - V-HEAD: TS3-330V

TS3-thumb-300-1

Side-By-Side Jack Stands & Tripods Comparison

Specifications	2 Ton Geared Height/Roller Base Stand (HDJ2C-100)	5 Ton Geared Height/Roller Base Stand (HDJ5C-100)	1.25 Ton Roller Tripod Stand (LD255-100)	2.5 Ton Tripod Stand - V-Head (TS3-160/100)	2.5 Ton Tripod Stand - V-Head (TS3-280V)	2.5 Ton Tripod Stand - V-Head (TS3-330V)
Loading Capacity	4,000 lbs (2-ton)	10,000 lbs (5-ton)	2,500 lbs (1.25-ton)	5,000 lbs (2.5-ton)	5,000 lbs (2.5-ton)	5,000 lbs (2.5-ton)
Footprint	24-7/8" x 37-1/8" x 27-15/16	28-1/2" x 42-3/8" x 29-1/4"	20-7/8" x 30-1/2" x 28"	20-¾” x 24” x 20-15/16”	To be added	To be added
Diameter Range	2" - 36"	4” - 48”	2” - 28”	2⅜” - 28”	To be added	To be added
Height Range	27-1/4" - 41-1/2" (top of wheel), Fine screw height adjustment	27-1/4" - 42" (top of wheel), Fine screw height adjustment	20-3/4" - 34-7/8" (top of wheel), Fine screw height adjustment	16” - 24-⅝”, Adjustable in 2-1/2" increments & Fine height adjustment	To be added	To be added
Weight	197 lbs	438 lbs	197 lbs	38 lbs	To be added	To be added

Know What Pipe Stands You'd Like? Fill Out Our Online Form Today: