Powered Height, Tilt and Rotate Welding Positioner: 1HT-300
The 1HT-300 powered height, tilt and rotate hydraulic positioner is the most dynamic positioner in its class and on the market. This positioner offers measured power control on three different axes. Welders, project managers and process engineers are drawn to the 1HT-300’s low profile and flat positions at loading and smooth powered adjust for height, tilt and rotation axes.
The 1HT-300 hydraulic tilt welding positioner has a load capacity of 6,000lbs. and boasts a turning torque power of 40,000lbs and a tilting torque of 80,000lbs. The rotating speed of the positioner is 0.2-2.0 rotations per minute (RPM), and conveniently is applied to most repositioning welding applications. The centerline height of the positioner can be adjusted between 25” and 72”. And its turntable working height can range between 29” and 75”. Actuation of height adjustability feature is done hydraulically for enhanced convenience and control.
It has power requirement of 480 V. 3-ph and ground capacity of 800 Amps. The tilting range of the positioner from the chuck plate vertical is -45° to 90°. The total mass of 1HT-300 is 5,400lbs and its dimensions are 71” x 98” x 29”. If compared with other hydraulic tilt welding positioners with similar specs, the 1HT-300’s compact design makes it stand out from the pack. There are forklift pockets below for easy manoeuvring without the need for an overhead crane as an added safety feature.
The hydraulic welding positioner is well-equipped for several small and large scale applications. It is very easy to operate and the safety of the operator will always be superlative with the positioner. Its functionality can be further enhanced with the below optional accessories.
Hydraulic Tilt Welding Positioner Accessories and Modification Options
There are many available accessories and modification options to customize your hydraulic tilt welding positioner to meet your shop floor’s requirements.
Hydraulic Positioner Controls
25 foot cable bidirectional hand pendants with or without digital readout is available. Wireless models are available. Forward reverse foot switches and variable speed foot switches can be included.
Hydraulic Positioner Fixtures
For holding the work pieces, chucks and grippers up to 60 inches outer diameter may be added
Hydraulic Positioner Additional Modifications
LJ Welding also offers a host of modification options for the 1HT-300 Hydraulic tilt welding positioner. The positioner is available with ground capacity of 200Amp, 400Amp, 800Amp and 1500Amp. The controls can be upgraded to HMI touchscreens. Moreover, the positioner can also be integrated with LJ’s welding manipulators or robotic welding arm for a complete welding cell.
Apart from buying, companies can rent and lease this positioner too.
Looking to rent or lease a welding positioner?
LJ Welding's engineering department provides a progressive approach to solving the unique problems that inevitably arise in our industry, resulting in efficient design, fabrication and timely delivery of custom equipment.
