Positioners – 16 inch Tilt Adjust Welding Positioner

Request a Quote

Get a quote on our 16" welding positioner by going to the request page now.

Load Capacity*: 3,000 lbs at chuck face
Turning Torque: 9,000 in-lbs
Adjustable Counter Balance: For offset loads up to 5,500 in-lbs
Maximum Turning Torque: 14,500 in-lbs (output torque + counter balance)
Gripper Options: 16" 3-Jaw Self Centering Scroll Chuck (18" to 24" with soft jaw extensions)
Footprint: 72" x 46" x 45" (height to center of chuck)
Equipment Mass: 1,600 lbs (excluding gripper)
Power Requirements: 110 V, 1-ph, 15A input
Operating Speed Range: 0.4-4.2 RPM
Controls: Variable Speed, forward/reverse DC drive. Optional foot or hand switches
Range of Operation: Manual Tilt (0° – 90° in 14 equal increments)
Ground: 300 Amps capacity; 750 Amp or 1500+ Amp Rotary Ground optional
Applications: Ideal for use with welding of heavy pipe, elbows, and fittings or for radial welds on shafts and wheels for medium duty pipe turning and spooling applications.

*Load rating based on center of mass of workpiece at various distances from chuck face; maximum acceptable load decreases with distance from chuck face. ALL LJ pipe spooling welding positioners should be used with LJ roller support stands where possible for maximum safety and efficiency.

• request a quote - 16" Positioner
• custom welding positioners

• 25" Tilt Positioner
• 25" Vertical Positioner
• 16" Tilt Positioner
• 16" Vertical Positioner

• gear tilt positioners
• pipe turning positioners
• benchtop positioners
• welding turntables
• manual welding positioners